All posts by Duf

A little over a month ago I did a 32 hour or so fast, the first time I did one for non-medical reasons. Weight loss wasn’t the primary goal it’s more about the health benefits of your body going into a state of ketosis where it starts consuming it’s reserves to maintain itself. Supposedly in this process potentially harmful cells are cleared out first which sounds like a good thing to me. It’s not exactly fun not eating but I got through it.

Well I am again fasting but this time I am extending to two full days. The last time I ate was Sunday evening. Since then I have been relying on coffee and small bits of sea salt to curb hunger issues. To be honest this morning I don’t even have real significant hunger right now. Where I can really feel the fast is trying to exercise. At the gym yesterday I felt an energy deficit which is to be expected. Today I will be doing yoga so it will be interesting to see how that goes. I weighed myself this morning and I have lost about 5.5 lbs since Sunday night. I’m not positive if I am going to eat immediately when 48 hours are up or push it until tomorrow morning with breakfast being my first meal.

Last night I worked on gathering HOA historical documentation to fulfill a request from a neighborhood resident who is clearly looking for a conflict. I only got on the HOA board towards the end of last year. It’s been more eventful than I would have hoped. When I moved to my house one of the big appeals was it is a neighborhood filled with nice people with an inexpensive HOA where basically only common sense rules are asked to be followed. I never would have expected to find myself in the situation that has been presented to me now where common courtesy is absent, replaced by deception and dishonesty. As unfortunate as it is, I will deal with it. There are no other options.

I got a pickleball session in Saturday morning. Once I got home I didn’t waste much time before heading into the office to do the planned server work on our primary domain controller. We got new hardware to migrate to and this should have been a pretty straightforward task. It wasn’t. For some reason the old domain controller had an issue that would not allow us to demote it or make any change whatsoever in it’s roles/features. The plan was to decommission the old one and then bring up the new one with the same name. Instead we wound up just bringing up the new server with a different name and moving all of the primary roles to it while leaving the old server online for now until we figure out why it won’t allow for any changes. The end result was what I thought might be an hour in the office turned into an entire afternoon.

One thing that did go as planned was installing the new AMS 2 onto my X1C printer. Installation went smoothly and the new unit worked well in my first multi-color print. I am looking forward to a lot of successful printing in the future. I also had to deal with a similar issue as I did before on my A1 where I got an extruder jam message. This time I took a different, easier approach where as before I just ripped into things unnecessarily which resulted in my screwing up the printer. I had the jam cleared in less than 5 minutes.

I called my dad on Father’s Day where we caught up on the latest and greatest. I filled him in on my personal conflict in my neighborhood as it reminded me of some of the conflicts he has had over the years. My approach however is definitely different than what he would normally do. I am basically documenting and collecting whatever needed to address the issue if it comes to a head. Documentation is a liar’s mortal enemy.

Last night I played sand volleyball. It’s been close to a month since I played last and this is only the third time I have played in 7 months plus. Things went surprisingly well. My team went 5-1 and my play was solid all around. Although I was tired by the end of the night overall my endurance felt improved over the last time I played. Most importantly other than some mild soreness I feel pretty unaffected physically from two plus hours of sand volleyball, a big positive in my mind.

My weekend is looking pretty full. I hope to play pickleball tomorrow morning and then have to go into the office Saturday afternoon to get some server work completed. I would love to get the gutters cleaned and the leaf guards installed. I also have the new AMS 2 system that I want to install on my X1C printer to address load errors I am getting from one of the slots. I will make sure to allocate some time to just chill, hopefully.

It was a stormy evening last night. Elsa is terrified of rain, lightning and thunder but surprisingly I got her to go outside and do her business after work as I held an oversized umbrella over her head. It was a good night to get stuff done around the house. It looks like I am selling one of my Prusa Mini’s to one of my YouTube subscribers. I worked on getting the printer ready by updating the four year old firmware and calibrating it. The firmware was so old that I could not just install the latest and greatest. It had to be a two stage process where I installed an intermediate version before I was able to jump to current.

I then turned my attention to the bench where the two Bambu printers reside. The area was just too cluttered with tools and accessories that are used to maintain the printers. Doing something as simple as changing the filament on the AMS or emptying the poop bucket often resulted in me knocking something else over. I dumped everything out and reorganized and relocated a number of items that were not needed. I have like 7 or 8 years of various tools associated with my 3D printer hobby, a number of them were no longer needed.

By the time I was done the bench top looked 100% better to me. When things that initially are chaotic become organized and orderly it brings me a sense of accomplishment and peace that I never tire of. To be honest I need to do a sweep throughout that entire room to get rid of things I really don’t use or need. When I moved in and found a place for everything I had I felt it was good enough but now it needs to enter phase two of clean up where anything that has not been touched since I moved in needs to get tossed.

The hard rain last night emphasized my need to attend to the gutters and leaf guards that I have sitting in a box. The water in certain areas was just pouring over the gutter sides due to debris. Last time I cleaned the gutters it only took me around an hour. I need to get that done soon before daily downpours is a reality.

I got out to see Ballerina last night which is meant to be a prequel to the John Wick series. The main character has all of the killing ability of John but in the package of a petite female. It definitely met or even exceeded the original movies in terms of action and methods that somebody can be eliminated even including the use of flame throwers, fire hose and ice skates, yes ice skates. I mean it was entertaining if you are care only about the action and little about much else. It felt very predictable and silly at times although I didn’t realize that John himself would be appearing in the prequel as much as he was. I’d give it a B.

Last night I wanted to set aside time to work on the X1C printer. I have been frustrated that I have not been able to utilize the printer fully since I got it with odd issues. I took several steps last night to correct it. I had a brand new hot end that I just received yesterday. I installed it but before I did I also removed the extruder and cleaned it. I also removed the PTFE tube to verify there were no blockages. While I was in there I also replaced the cutter blade. None of this was an extreme measure however I took an additional step.

I decided to buy the AMS 2 unit (the thing that holds the four different filaments) that comes with Bambu’s new printer, the H2D. It has a number of improvements and is backwards compatible with the X1C. Was this step necessary? Probably not but I plan to use this printer heavily so I could justify the new AMS in my head. I can sell the old AMS hopefully to offset some of the expense. I did a small three color print after all of the work and it came out fine, the first multicolor print to do so. Hopefully I soon can start doing a lot less trouble shooting and more printing on the X1C.

Friday evening I offered to take some friends of mine over to Miami to attend a concert. I once again heavily utilized Tesla FSD to make what could have been a white knuckle driving experience much more pleasant. Concert parking is not cheap nowadays, $60 for the privilege is the going rate. I just hung mostly in my car for the duration although a few times I walked around outside where I could hear the music pretty clearly. The people watching opportunities were top tier. FSD was again a big help on the return trip as it does not get drowsy as I do when driving at 1AM.

Saturday I did something I had not done in a very long time, change the oil in my Tacoma. I change the oil in the truck consistently every 5000 miles. The thing is nowadays it takes a long time for me to accumulate 5000 miles on my 2016 Taco. The last time I changed the oil was February of last year. The work went fine with me wearing a bunch of oil during the process which is normal.

I also did a test run on my generator since we are now getting back into hurricane season. There is nothing worse than needing a generator and having it be dead. I was pretty busy all Saturday afternoon just tending to stuff that needed to get done. I did some more testing on my new X1C and again ran into issues doing a multi-color print. I am going to start throwing some spare parts at the problem. The parts were included with the printer so I may as well give it a go.

My significant event on Sunday was doing a range test on my new Nosfet Aero. I heard others mention getting around 25 miles of range so I expected something in that ballpark. It was very warm Sunday afternoon but I sweated through a 32 mile ride. The wheel exceeded my expectations significantly. It’s been a long time since I have done a ride of that duration/length and my body felt it. I woke up with very sore calves the following day. It was a great ride that took me all over my local stomping area.

I stayed up late editing the footage from the day before passing out somewhere around midnight.

Yesterday I tried my first multicolor print on the X1C. Things appeared to be going great until the 50% mark where it had to load black filament for the first time. It failed. I tried to just do an unload and reload manually but the color did not load to the hot end. I am not sure if there is a blockage in the hot end or something else but it was too late at night for me to worry about it. I’ll have to dig deeper this weekend.

Speaking of weekend it will likely be a busy one. I have three projects that I need to get done sometime soonish. The oil in the Tacoma needs to be changed, a task I do far less often than I once did. I also bought leaf guards for my gutters that I want to install at strategic locations. Of course before installing those I need to clean out the gutters first. Finally I need to refresh the mulch in the landscaped areas around the house, a laborious but simple process. It would be nice if I get at least one of those tasks done over the weekend.

Yesterday the shocking news, to me at least, that Elon and Trump are now engaged in all out warfare, was all over the internet. Somehow just now Elon found out just how full of shit the new budget bill is and is angry about it. Things quickly escalated to personal attacks on both sides with Elon claiming credit for Trumps victory as well as accusing him as being prominently mentioned in the Epstein files. I believe this morning I heard he also called for Trump’s impeachment. Trump said Elon was just mad about the EV mandate being revoked and made direct threats to various connections/support Elon’s companies receive from the federal government.

Just last week Elon was in the White House getting his ass kissed left and right by Trump, even being given a golden key to the capital. To have things reverse so quickly is pretty crazy even by today’s standards where insanity is the new norm. Both men are certified egomaniacs and I don’t see either choosing to back down. Where this escalation leads nobody knows. The irony of it all…

I have mostly separated myself from the circus which is now the US political system. It’s corrupted to it’s core and I can do nothing to change it. I try to keep things I have no control over from having a significant impact on my day to day happiness and quality of life.

I had a very productive night, not only working on tasks related to getting back from the trip but a number of other things as well. One of those things was getting the X1C set up in the office. To make room I did a printer shuffle which included moving one of my Prusa’s to the guest bedroom. Setting up and calibrating the X1C took some time.

My first test print messed up so I think I have some more tweaking to do yet. I also set up my Prusa Mini for the first time in over a year just to make sure it still works. The printer has been collecting dust on a shelf for quite awhile. My plan is to sell that printer and possibly two more. If I am not using them, why keep them.

I also unboxed a sand art device that arrived while I was gone. I ordered it over a month ago. I have seen these for years and always wanted one. It utilizes a small metal ball with a magnet underneath to draw patterns in fine white sand. When combined with the RGB lighting it sets a very chill vibe. I really like it.

When I was doing the set up of the X1C I was having an issue seeing well because the lighting in the office is less than fantastic. I remembered another box that came while I was gone, a head mounted light device.

This thing is fantastic. Sure you look a little ridiculous but man does it light up whatever you are working on. No more need to try to awkwardly use your phone light as the head mounted option lights up whatever you are looking at. I’m not quite sure how I have managed to go this long with out one.

When I finally retired to bed it was with a feeling of satisfaction for making my Tuesday evening especially productive.

I returned last evening from a long road trip to Texas to attend my niece’s graduation ceremony. It was a very condensed trip over 5 days which included a total of roughly 48 hours of driving, yes 48 hours. I will get into some details about the drive in a bit.

I had not seen my sister or her family in around two years. In that time period the kids, especially Griffin have grown like crazy. I am pretty sure he has sprung up at least 7 or 8 inches since I last saw him.

I got to see their dog and my good buddy Ozzy who of course was beyond excited. Their house was looking great. Damon had completed a number of projects since I last visited. I have always wished I had the same degree of construction expertise as he has. He has the ability to build an entire house himself, if he wanted to.

Emily’s graduation ceremony was very cool, held in a big ballroom. The event included dinner, the ceremony itself, and music/dancing afterward. It was very well done. Afterward we headed back to their house where the kids kicked my ass in some video games, one of their favorite things to do with Uncle Shawn. We also went out for a dinner and a couple big breakfasts while there, the last of which was Sunday morning, the day I pulled out. It was really nice to see everyone and made me wish that 1400 miles was not always between us.

The drive back was just as long of course but thanks to the Tesla full self driving feature it was way less stressful than it could have been. FSD was nothing short of amazing.

If I were to guess the car drove itself for 95% of the trip and it did so pretty flawlessly. This was not a case of just allowing it to take over in wide open highways. I allowed FSD to navigate crazy busy Dallas rush hour traffic and the car did not flinch. It handled people cutting in and out, squeezing over to get to the correct exit and every other scenario you could imagine without issue. It totally changed the stress level of the journey.

Of course I could drive in that traffic but it requires your head being on a swivel as you are limited to your maybe 145 degree field of vision as opposed to seeing 360 degrees in real time as the car does. Being able to just pick a destination and have the car do the heavy lifting is a real game changer when it comes to being able to tolerate long drives such as this. In addition the seats are so comfortable that even with that amount of saddle time my ass or back was never in significant discomfort.

Charging the car was easy as well as it automatically routes you through superchargers as necessary. Most of the charge stops were 15 minutes or less. People view having to charge more often than filling up your car with gas as a huge hassle. It’s not in reality, at least for me. Each driving segment is normally between one and a half and two and half hours in length. After that period of time getting out to stretch my legs, use the bathroom and grab a drink or snack is welcomed, not annoying. To me the Tesla gets an A+ for it’s performance during this trip.

I am tired today as I did not allow myself an additional day off to get things back in order with this trip but I will survive. It was a good experience in every aspect and I’m glad I did it.